STEP 1: HOW MUCH PLOTSTART?

2.5 Gallons of PlotStart™ = 1 Ton of Lime Per Acre. If your soil pH is 4.5-5.5 use 5 gallons of PlotStart™ per acre (equivalent to 2 tons of lime per acre). Use a max of 2 jugs (5 gallons PlotStart™per acre) if the soil is acidic (4.5-5 pH) or spray 5 gallons of PlotStart™ per acre in the spring, then again in the fall for the fall planting totaling 10 gallons per acre over the course of 12 months.

STEP 2: MIX RATE

PlotStart™ must be mixed with water to evenly distribute it over the intended acreage. For most applications, 10-15 gallons of water is needed to apply PlotStart™ over a single acre. PlotStart™ is NOT applied in an oz/gallon of water ratio like herbicides, rather it is a per acre application. Simply mix enough water to evenly distribute the 2.5 gallons or 5 gallons (depending on pH) over the correct amount of acreage. PlotStart can be. Mixed directly with nitrogen solutions, and soil-applied herbicides. PlotStart™ CANNOT BE APPLIED WITH ROUND-UP® or GLYPHOSATE.

EXAMPLE: If you have a 25 gallon ATV sprayer, you will likely be able to evenly spray 2 acres. Fill the tank with 2.5 gallons per acre of PlotStart™ for soils 5.5 -7 in pH, or 5 gallons per acre for soils more acidic than 5.5. for a 2-acre food plot with a soil pH of 6.0, you would fill the tank with 2 x 2.5-gallon jugs (2.5 gallons per acre) then fill the rest of the tank up with water.

STEP 3: SPRAY

Once you have evenly distributed the correct amount of PlotStart™ per acre you are done! The effective formula of PlotStart™ will do the rest. It is suggested to follow up with PlotBoost™ after the food plot reaches full ground coverage (3-5 weeks) or when directly in the tank with your first round of post-emergent herbicide.

STEP 1: HOW MUCH PLOTBOOST™?

• 32 oz of PlotBoost™ Per acre can be applied to a food plot 3X per year. Typical application includes 3-5 weeks after germination or during the first post-emergent herbicide spraying.
• PlotBoost™ species recommendations:
• Spring plantings (Ex: clover, alfalfa, chicory) North – May to July (up to 3X); South – March to June (up to 3X)
• Summer plantings (Ex: corn, soybeans, sorghum) North – May to August (up to 3X); South – April to August (up to 3X)
• Fall plantings (Ex: wheat, brassica, turnips) North – August to November (up to 3X); South – September to December (up to 3X)

STEP 2: MIX RATE

PlotBoost™ must be mixed with water to evenly distribute it over the intended acreage. For most applications, 10-15 gallons of water is needed to apply PlotBoost™ over a single acre. PlotBoost™ is NOT applied in an oz/gallon of water ratio like herbicides, rather it is a per acre application. Simply mix enough water to evenly distribute the 32 oz over the correct amount of acreage. PlotBoost™ can be. mixed directly with Round-up® or Glyphosate, fungicides, insecticides, and other herbicides in the same spray tan, saving time!

EXAMPLE: If you have a 25 gallon ATV sprayer, you will likely be able to evenly spray 2 acres. Fill the tank with 32 oz gallons per acre of PlotBoost™ per acre then fill the rest of the tank up with water. For a 2 acre application, this would be 64 oz of PlotBoost™ and the rest of the tank filled with water.

STEP 3: SPRAY

Once you have evenly distributed the correct amount of PlotBoost™ per acre you are done! The effective it is suggested to follow up with PlotBoost™ again before summer droughts or before deer season to increase attraction and tolerances of the plot for a maximum of 3X per year.